START International ®
Flexible. Cable-free. Immediately operational. The ZCM0800 by START International is the compact battery-powered tape dispenser for narrow adhesive tapes up to 25 mm wide with three preset fixed lengths (30 / 45 / 90 mm). Automatic feed, manual cut — no mains connection, no programming required. The ideal entry-level solution for low-volume tape applications in production, laboratory, and mobile environments. Made with Japanese components.
Mains power and battery in one device — maximum flexibility. The ZCM0800-WT by START International is the mains-powered variant of the ZCM0800, supplied with a universal AC adapter (100–240 V). Three preset fixed lengths (30 / 45 / 90 mm), tape widths up to 25 mm, automatic feed. Optionally operable with 3 D-cell batteries — the versatile entry-level solution for tape applications in production and laboratory environments worldwide. Made with Japanese components.
LD3000 High-Speed Label Dispenser for Small Labels – automated label dispensing for maximum throughput.
- High-speed dispenser for small labels and die-cuts from paper, polyester, vinyl, acetate, foam and film
- Light sensor for reliable peeling and forwarding of every label
- Up to 8 units can be daisy-chained as a single output system
LD3000ESD High-Speed Label Dispenser for ESD-Protected Areas – automated label dispensing for maximum throughput.
- ESD-protected version of the LD3000 for electrostatic-sensitive workplaces
- Prevents electrostatic discharge when labelling electronic components
- Light sensor for reliable dispensing of small labels and die-cuts
LD3500 High-Speed Label Dispenser for Small Labels – automated label dispensing for maximum throughput.
- High-speed dispenser for small labels and die-cuts from paper, polyester, vinyl, acetate, foam and film
- Light sensor for reliable peeling and forwarding of every label
- Compatible with LD3000 – up to 8 units can be daisy-chained
Series production demands consistency — the ZCM1000 by START International delivers it. This electric tape dispenser combines photocell automation, digital length presetting, and a proven guillotine cut into one compact industrial tool for tape widths from 7 to 51 mm and cut lengths from 20 to 999 mm. The included 3-in-1 core holder enables tool-free roll changes in seconds. Engineered in Japan, trusted worldwide — for wire harnessing, PCB masking, assembly, and beyond.
The START International ZCM1100K is an electric tape dispenser designed for operations where safety, precision, and ease of use are critical. Unlike standard models, the ZCM1100K features an integrated safety guard that reliably protects the operator during the cutting process. It also includes a unique creaser function, which facilitates bending and removing the tape – a clear advantage in fast, repetitive workflows. Handling tape widths from 13 to 30 mm, the dispenser accommodates a wide range of industrial tapes and delivers consistently accurate, adjustable lengths. Its automatic feed and cut mechanism minimizes material waste and significantly increases efficiency. These features set the ZCM1100K apart from simpler dispensers, making it the ideal choice for medium to high-volume production where productivity, ergonomics, and safety are equally important.
VHB™ tapes, foam adhesives, and double-sided high-tack materials are the ultimate test for any tape dispenser. The ZCM1000-NS by START International passes it — with Teflon-coated non-stick advancement rollers that feed and precisely cut aggressive adhesive tapes from 7 to 51 mm wide at lengths from 20 to 999 mm, without jamming, wrapping, or adhesive build-up. Photocell automation, digital LED presetting and the proven ZCM1000 industrial platform — for automotive, electronics, renewables, and beyond.
Narrow tapes demand a dispenser built for their dimensions. The ZCM1000B by START International features a purpose-built specialty advancement roller that reliably guides, feeds, and precisely cuts adhesive tapes from 3 to 25 mm wide at lengths from 20 to 999 mm — without lateral drift, slippage, or misfeeds. Photocell automation, digital LED presetting and the proven ZCM1000 industrial platform — the reference solution for narrow tape applications in electronics, wire harness manufacturing, and precision assembly worldwide.
Glass cloth tapes and other flimsy adhesive materials demand a dispenser built for them. The ZCM1000C by START International features a modified specialty cutting head that reliably guides, feeds, and precisely cuts structured and lightweight tapes from 7 to 51 mm wide at lengths from 20 to 999 mm. Photocell automation, digital LED presetting and the proven ZCM1000 industrial platform — optimised for challenging materials in electronics, automotive, and energy manufacturing.
Where standard dispensers stop, the ZCM1000D by START International begins. A purpose-built custom circuit board enables this electric tape dispenser to cut pieces down to a minimum length of just 5 mm — across the full tape width range of 7 to 51 mm and a cut range of 5 to 999 mm. Digital LED presetting, photocell automation and the proven ZCM1000 industrial platform — engineered for precision manufacturing, electronics, and micro-assembly worldwide.
Two tape rolls. One machine. Full synchronisation. The ZCM1000E by START International combines a dual cutting head with two independent photocells to dispense two rolls simultaneously — the next feed cycle triggers only once both pieces have been removed. Tape widths 7–51 mm, cut lengths 20–999 mm, digital LED presetting. The most efficient solution for workstations with parallel tape requirements — on the proven ZCM1000 industrial platform.
Protective films demand a dispenser that treats surfaces with care. The ZCM1000NM by START International features specially coated non-marking advancement rollers that feed and cut film-based tapes from 7 to 51 mm wide at lengths from 20 to 999 mm — without leaving a single mark on the surface. Photocell automation, digital LED presetting and the proven ZCM1000 industrial platform — the standard solution for display protection, automotive surfaces, electronics, and battery manufacturing worldwide.
Workplace safety and dispensing precision in a single machine. The ZCM1100 by START International combines the proven ZCM1000 dispensing process with an active safety guard cutting head that physically blocks the cutting mechanism whenever foreign objects are present in the blade area. Tape widths 7–51 mm, cut lengths 30–999 mm, digital LED presetting, photocell automation — the reference solution for safety-conscious production environments with medium to high throughput. Made in Japan, CE certified.
zcM1500W Lightweight Precision Cutter for Non-Adhesive Materials up to 51 mm – automated material cutting for repeatable results.
- Cuts most tape materials up to 51 mm wide to adjustable lengths from 20 to 999 mm
- Cutting accuracy of ±1 mm ensures consistent piece sizes
- Photo-electric actuation or manual feed – flexible in use
zcM2500 Non-Adhesive Tape Cutter with Safety Guard – automated material cutting for repeatable results.
- Integrated safety guard automatically stops the machine when foreign objects are detected (fingers, tools)
- Cuts tapes up to 51 mm wide with ±1 mm accuracy
- Safe to use in environments with increased injury risk
LD6025 Label Dispenser for Short Barcode Labels – automated label dispensing for maximum throughput.
- Designed for short barcode labels and die-cuts from paper, polyester, vinyl, acetate, foam, and film
- Light sensor ensures consistent peeling and feeding of every label
- Automatic liner rewind keeps the workstation clean
LD6050 High-Speed Label Dispenser for All Label Types – automated label dispensing for maximum throughput.
- Dispenses virtually all types of labels and die-cuts from paper, polyester, vinyl, acetate, foam and film
- Photo sensor for consistent and reliable dispensing
- Adjustable peel plate for easy removal of hard-to-peel labels
LD6100 Electronic Label Dispenser for Wide Labels – automated label dispensing for maximum throughput.
- Successor to the LD5100 – faster and more versatile
- Dispenses virtually all label types from paper, vinyl, acetate, foam and film
- Patented fixing holes allow direct mounting on workbenches or fixtures