START International ®
DC6050 High-Speed Dispenser for Die-Cuts and Special Shapes – automated label dispensing for maximum throughput.
- Designed specifically for die-cut parts in virtually any shape – round, oval, rectangular and custom
- Dispenses die-cuts from paper, vinyl, acetate, polyester, foam and film
- Photo sensor for precise and continuous dispensing
LAP65-100 Manual Label Applicator for Wide Labels (100 m Roll) – automated label dispensing for maximum throughput.
- Portable hand applicator for wide labels up to 100 mm – directly on boxes, bags and packaging
- No custom slot modifications required – direct application without conversion
- Rugged anodized aluminum housing for durable industrial use
LAP65-30 Manual Label Applicator for Narrow Labels (30 m Roll) – automated label dispensing for maximum throughput.
- Portable hand applicator for narrow labels – directly on boxes, bags and packaging
- No custom slot modifications required – direct application without conversion
- Rugged anodized aluminum housing for durable industrial use
LAP65-60 Manual Label Applicator for Medium Labels (60 m Roll) – automated label dispensing for maximum throughput.
- Portable hand applicator for medium label formats – directly on boxes, bags and packaging
- No custom slot modifications required – direct application without conversion
- Rugged anodized aluminum housing for durable industrial use
LD-COUNTER Electronic Label Dispensing Counter for LD6000/8000 – automated label dispensing for maximum throughput.
- Counts dispensed labels electronically per dispense cycle
- Retrofit solution for all LD6000 and LD8000 series dispensers
- Enables production and consumption monitoring directly at the unit
LD-SENSOR_EXT_KIT External Photo Sensor Extension for 90° Detection – automated label dispensing for maximum throughput.
- Allows the photo sensor to detect labels at a 90-degree angle
- Retrofit solution for existing LD2000, LD6000 and LDX6000 dispensers
- Reliably detects clear and reflective label materials
LD3000 High-Speed Label Dispenser for Small Labels – automated label dispensing for maximum throughput.
- High-speed dispenser for small labels and die-cuts from paper, polyester, vinyl, acetate, foam and film
- Light sensor for reliable peeling and forwarding of every label
- Up to 8 units can be daisy-chained as a single output system
LD3000ESD High-Speed Label Dispenser for ESD-Protected Areas – automated label dispensing for maximum throughput.
- ESD-protected version of the LD3000 for electrostatic-sensitive workplaces
- Prevents electrostatic discharge when labelling electronic components
- Light sensor for reliable dispensing of small labels and die-cuts
LD3500 High-Speed Label Dispenser for Small Labels – automated label dispensing for maximum throughput.
- High-speed dispenser for small labels and die-cuts from paper, polyester, vinyl, acetate, foam and film
- Light sensor for reliable peeling and forwarding of every label
- Compatible with LD3000 – up to 8 units can be daisy-chained
LD6025 Label Dispenser for Short Barcode Labels – automated label dispensing for maximum throughput.
- Designed for short barcode labels and die-cuts from paper, polyester, vinyl, acetate, foam, and film
- Light sensor ensures consistent peeling and feeding of every label
- Automatic liner rewind keeps the workstation clean
LD6050 High-Speed Label Dispenser for All Label Types – automated label dispensing for maximum throughput.
- Dispenses virtually all types of labels and die-cuts from paper, polyester, vinyl, acetate, foam and film
- Photo sensor for consistent and reliable dispensing
- Adjustable peel plate for easy removal of hard-to-peel labels
LD6100 Electronic Label Dispenser for Wide Labels – automated label dispensing for maximum throughput.
- Successor to the LD5100 – faster and more versatile
- Dispenses virtually all label types from paper, vinyl, acetate, foam and film
- Patented fixing holes allow direct mounting on workbenches or fixtures
LD8025 High-Speed Label Dispenser for Narrow Long Labels – automated label dispensing for maximum throughput.
- Successor to the LD5500 – optimized for narrow but long labels and die-cuts
- Dispenses labels up to 305 mm long from paper, polyester, vinyl, acetate and film
- Photo sensor for consistent peeling and forwarding
LD8050 High-Speed Label Dispenser for Long Labels – automated label dispensing for maximum throughput.
- Successor to the LD5500 – for long, wrap-around-style labels and die-cuts
- Dispenses labels up to 305 mm long from paper, polyester, vinyl, acetate and film
- Photo sensor for consistent peeling and feeding even with large labels
LD8100 High-Speed Label Dispenser for Wide Long Labels – automated label dispensing for maximum throughput.
- Successor to the LD5500 – combines wide and long label capability in one powerful unit
- Dispenses labels up to 305 mm long and 127 mm wide from paper, polyester, vinyl, acetate and film
- Photo sensor for reliable peeling and forwarding
LDHANGER16 Wall-Mount Bracket for Labelmoto Label Dispensers – automated label dispensing for maximum throughput.
- Space-saving hanging mount for Labelmoto label dispensers – workbench stays clear
- Robust aluminum construction for stable and long-lasting use
- Quick installation – immediately ready for use
LDHANGTAB Label Dispenser for Hang Tabs and Punch-Hole Tags – automated label dispensing for maximum throughput.
- Purpose-built for SB hang tags and punch-hole cards – clear or opaque
- Photo sensor ensures precise and consistent dispensing
- Accepts large rolls up to 406 mm OD – fewer roll changes in production
LD-COUNTER Electronic Label Dispensing Counter for LD6000/8000 – automated label dispensing for maximum throughput.
- Counts dispensed labels electronically per dispense cycle
- Retrofit solution for all LD6000 and LD8000 series dispensers
- Enables production and consumption monitoring directly at the unit
LD-COUNTER Electronic Label Dispensing Counter for LD6000/8000 – automated label dispensing for maximum throughput.
- Counts dispensed labels electronically per dispense cycle
- Retrofit solution for all LD6000 and LD8000 series dispensers
- Enables production and consumption monitoring directly at the unit
LDX6050 High-Speed Label Dispenser for Wide Labels – automated label dispensing for maximum throughput.
- High-speed dispenser for wide labels and die-cuts from paper, polyester, vinyl and film
- Photo sensor for precise and consistent dispensing
- Adjustable peel plate – handles even hard-to-peel labels
LDX6100 High-Speed Label Dispenser for Wide Labels – automated label dispensing for maximum throughput.
- High-speed version of the LD6100 – for demanding production environments
- Photo sensor for precise dispensing even at high speeds
- Adjustable peel plate for hard-to-peel labels on acetate or vinyl
LDX8025 High-Speed Label Dispenser for Narrow Long Labels – automated label dispensing for maximum throughput.
- Successor to the LD7500 – high-speed dispenser for narrow, long labels
- Dispenses long and narrow labels from paper, vinyl, acetate, polyester and film
- Photo sensor for precise dispensing even of hard-to-peel labels
LDX8050 High-Speed Label Dispenser for Wide Long Labels – automated label dispensing for maximum throughput.
- Successor to the LD7500 – for wide and long labels in high-speed applications
- Dispenses long and wide wrap-around labels from paper, vinyl, acetate, polyester and film
- Photo sensor for precise dispensing even of hard-to-peel labels
LDX8100 High-Speed Label Dispenser for Large Formats – automated label dispensing for maximum throughput.
- Successor to the LD7500 – for large and wide labels at high speed
- Dispenses wide and long labels from paper, vinyl, acetate, polyester and film
- Photo sensor for consistent dispensing even of hard-to-peel labels
Series production demands consistency — the ZCM1000 by START International delivers it. This electric tape dispenser combines photocell automation, digital length presetting, and a proven guillotine cut into one compact industrial tool for tape widths from 7 to 51 mm and cut lengths from 20 to 999 mm. The included 3-in-1 core holder enables tool-free roll changes in seconds. Engineered in Japan, trusted worldwide — for wire harnessing, PCB masking, assembly, and beyond.
The START International ZCM1100K is an electric tape dispenser designed for operations where safety, precision, and ease of use are critical. Unlike standard models, the ZCM1100K features an integrated safety guard that reliably protects the operator during the cutting process. It also includes a unique creaser function, which facilitates bending and removing the tape – a clear advantage in fast, repetitive workflows. Handling tape widths from 13 to 30 mm, the dispenser accommodates a wide range of industrial tapes and delivers consistently accurate, adjustable lengths. Its automatic feed and cut mechanism minimizes material waste and significantly increases efficiency. These features set the ZCM1100K apart from simpler dispensers, making it the ideal choice for medium to high-volume production where productivity, ergonomics, and safety are equally important.
Adhesive tape tabs with a non-stick grip flap — fast, manual, no power required. The TAB100 by START International is a manual tab dispenser that produces tape pieces with an automatically folded, non-adhesive grip end via a single hand lever pull. Tape width 12–25 mm, adjustable cut length 50–210 mm, solid metal housing. The simplest solution for tabs in laboratory, quality control, and packaging applications.
TBC50 Heavy-Duty Material Cutter for Non-Adhesive Materials – automated material cutting for repeatable results.
- Non-adhesive heavy-duty material cutter for tubing, hoses, Nomex, Velcro and more
- Material width up to 110 mm – or multiple narrower rolls simultaneously
- Up to 140 cuts per minute at 50 mm – ideal for high-volume lines
TBC50-H Non-Adhesive High-Performance Cutting Unit with Hot Knife – automated material cutting for repeatable results.
- Hot knife seals frayed ends of tapes, straps, tubing and rope during cutting
- Up to 140 cuts per minute at 50 mm length – designed for high-volume production
- Material width up to 90 mm or multiple rolls simultaneously
TBC50-S Non-Adhesive Cutting Unit for Printed Labels with Photo Sensor – automated material cutting for repeatable results.
- High-precision photo sensor detects print marks for position-accurate cuts
- Cuts printed labels from fabric, plastic and metal in heavy-duty production
- Up to 140 cuts per minute at 50 mm – fast and precise
TBC50LH Non-Adhesive Electric Cutting Unit – automated material cutting for repeatable results.
- Electric cutting unit for non-adhesive materials such as tapes, straps and tubing
- Microprocessor-controlled precision for consistent cuts
- Suitable for heavy-duty production with repeatable cut lengths
TBC53-R Non-Adhesive Cutting Unit for Round and Straight Cuts – automated material cutting for repeatable results.
- Only TBC series machine with rotor blade – enables both round and straight cuts
- Ideal for tubing, hoses, Nomex, Velcro and tape production
- Material width up to 70 mm or multiple rolls simultaneously
TBC552L Large-Format Cutter for Non-Adhesive Materials up to 210 mm – automated material cutting for repeatable results.
- Large-format cutter for material widths up to 210 mm – significantly wider than TBC50 series
- 32 m/min cutting speed for high-volume production
- Handles tubing, hoses, Nomex, Velcro, tapes and similar materials
TBC553L XL Cutter for Non-Adhesive Materials up to 310 mm – automated material cutting for repeatable results.
- XL cutter for material widths up to 310 mm – the widest machine in the TBC series
- 32 m/min cutting speed for high-volume production
- Handles tubing, hoses, Nomex, Velcro, tapes and similar materials
TBC55SK Non-Adhesive Cutting Unit with Integrated Stacker – automated material cutting for repeatable results.
- Integrated stacker sorts and stacks cut labels directly at the output
- High-precision photo sensor detects print marks for position-accurate cuts
- Cuts printed labels from fabric, plastic and metal in heavy-duty production
High-volume production demands heavy-duty equipment. The TDA080 by START International is an electric industrial tape dispenser with all-metal construction, four operating modes, and a tape width range of 6 to 80 mm at cut lengths up to 9,999 mm. Feed speed 16.8 cm/s, digital length setting, integrated safety interlock. The proven heavy-duty platform for automotive, electronics, packaging, and aerospace — engineered in the USA, CE certified.
Two tapes. One cut. Maximum efficiency. The TDA080-LAM by START International laminates two tape rolls simultaneously, feeds the combined tape, and cuts it precisely to the programmed length — in a single automated step. Tape width 6–51 mm, cut lengths 40–9,999 mm, four operating modes. The industrial solution for motor manufacturing, coil winding, and combined tape applications worldwide. Engineered in the USA, CE certified.
Lined adhesive tapes without manual liner peeling. The TDA080-LR by START International combines Heavy-Duty tape dispensing with an integrated automatic liner remover — ideal for aluminium tapes and all lined adhesive tapes up to 51 mm wide. Cut lengths 40–9,999 mm, four operating modes, ±1 mm accuracy. No manual peeling — clean process, maximum throughput. Engineered in the USA, CE certified.