Workplace safety and dispensing precision in a single machine. The ZCM1100 by START International combines the proven ZCM1000 dispensing process with an active safety guard cutting head that physically blocks the cutting mechanism whenever foreign objects are present in the blade area. Tape widths 7–51 mm, cut lengths 30–999 mm, digital LED presetting, photocell automation — the reference solution for safety-conscious production environments with medium to high throughput. Made in Japan, CE certified.

Protective films demand a dispenser that treats surfaces with care. The ZCM1000NM by START International features specially coated non-marking advancement rollers that feed and cut film-based tapes from 7 to 51 mm wide at lengths from 20 to 999 mm — without leaving a single mark on the surface. Photocell automation, digital LED presetting and the proven ZCM1000 industrial platform — the standard solution for display protection, automotive surfaces, electronics, and battery manufacturing worldwide.

Two tape rolls. One machine. Full synchronisation. The ZCM1000E by START International combines a dual cutting head with two independent photocells to dispense two rolls simultaneously — the next feed cycle triggers only once both pieces have been removed. Tape widths 7–51 mm, cut lengths 20–999 mm, digital LED presetting. The most efficient solution for workstations with parallel tape requirements — on the proven ZCM1000 industrial platform.

Where standard dispensers stop, the ZCM1000D by START International begins. A purpose-built custom circuit board enables this electric tape dispenser to cut pieces down to a minimum length of just 5 mm — across the full tape width range of 7 to 51 mm and a cut range of 5 to 999 mm. Digital LED presetting, photocell automation and the proven ZCM1000 industrial platform — engineered for precision manufacturing, electronics, and micro-assembly worldwide.

Glass cloth tapes and other flimsy adhesive materials demand a dispenser built for them. The ZCM1000C by START International features a modified specialty cutting head that reliably guides, feeds, and precisely cuts structured and lightweight tapes from 7 to 51 mm wide at lengths from 20 to 999 mm. Photocell automation, digital LED presetting and the proven ZCM1000 industrial platform — optimised for challenging materials in electronics, automotive, and energy manufacturing.

Narrow tapes demand a dispenser built for their dimensions. The ZCM1000B by START International features a purpose-built specialty advancement roller that reliably guides, feeds, and precisely cuts adhesive tapes from 3 to 25 mm wide at lengths from 20 to 999 mm — without lateral drift, slippage, or misfeeds. Photocell automation, digital LED presetting and the proven ZCM1000 industrial platform — the reference solution for narrow tape applications in electronics, wire harness manufacturing, and precision assembly worldwide.

VHB™ tapes, foam adhesives, and double-sided high-tack materials are the ultimate test for any tape dispenser. The ZCM1000-NS by START International passes it — with Teflon-coated non-stick advancement rollers that feed and precisely cut aggressive adhesive tapes from 7 to 51 mm wide at lengths from 20 to 999 mm, without jamming, wrapping, or adhesive build-up. Photocell automation, digital LED presetting and the proven ZCM1000 industrial platform — for automotive, electronics, renewables, and beyond.

Mains power and battery in one device — maximum flexibility. The ZCM0800-WT by START International is the mains-powered variant of the ZCM0800, supplied with a universal AC adapter (100–240 V). Three preset fixed lengths (30 / 45 / 90 mm), tape widths up to 25 mm, automatic feed. Optionally operable with 3 D-cell batteries — the versatile entry-level solution for tape applications in production and laboratory environments worldwide. Made with Japanese components.

Flexible. Cable-free. Immediately operational. The ZCM0800 by START International is the compact battery-powered tape dispenser for narrow adhesive tapes up to 25 mm wide with three preset fixed lengths (30 / 45 / 90 mm). Automatic feed, manual cut — no mains connection, no programming required. The ideal entry-level solution for low-volume tape applications in production, laboratory, and mobile environments. Made with Japanese components.

Simple. Robust. Mains-independent. The ZCM0300 by START International is the proven manual tape dispenser with hand lever for repetitive tape applications without any power supply. Cut lengths 13–102 mm mechanically preset, tape widths 6–25 mm, stable weighted base. The reliable base solution for low-volume production, laboratory, and all workstations where simplicity is the priority. Made with Japanese components.

Universal Liner Entferner
Entfernt und löst die obere Schutzschicht der Etiketten oder der Klebebänder

Large Liner Entferner & Tape Spender
Universal-Trägerbandtrenner für ZCM Series-Klebebandspender

Large-area bonding with VHB™ and foam tapes — up to 150 mm wide. The TDA150-NS-LF by START International is the Heavy-Duty dispenser with non-stick advancement rollers for wide high-tack materials: tape widths 6–150 mm, cut lengths 40–9,999 mm, four operating modes, max. 3 mm foam thickness. The most powerful solution for large-area tape applications in automotive, solar, and appliance manufacturing. Engineered in the USA, CE certified.

Wide protective films without surface marks — industrial, process-safe, reproducible. The TDA150-NM by START International combines the heavy-duty performance of the TDA150 with non-marking advancement rollers for protective films and film tapes up to 150 mm wide. Cut lengths 40–9,999 mm, four operating modes, ±1 mm accuracy. The global reference for wide-format display, automotive, and electronics protective film applications. Engineered in the USA, CE certified.

Heavy-duty dispensing for the widest industrial adhesive tapes. The TDA150 by START International is the electric heavy-duty tape dispenser for tape widths up to 150 mm — with all-metal construction, four operating modes, cut lengths 40–9,999 mm, and a feed speed of 16.8 cm/s. The global reference solution for high-volume production lines with wide tapes in automotive, packaging, and renewable energy manufacturing. Engineered in the USA, CE certified.

VHB™ tapes and foam adhesives dispensed without blockage. The TDA080-NS by START International is the Heavy-Duty tape dispenser with non-stick advancement rollers for the highest-tack industrial materials — up to 80 mm wide, max. 3 mm foam thickness, cut lengths 40–9,999 mm, four operating modes. No adhesion. No jamming. No production stoppage. The global reference for structural bonding and high-tack adhesive applications. Engineered in the USA, CE certified.

Protective films without surface marks — the TDA080-NM by START International makes it possible. As a modified Heavy-Duty dispenser with non-marking advancement rollers, it processes protective films and sensitive film tapes up to 80 mm wide without leaving any surface impressions. Cut lengths 40–9,999 mm, four operating modes, high-speed operation. The global reference for display, automotive, and electronics protective film applications. Engineered in the USA, CE certified.

Five lengths. One machine. Zero changeover time. The TDA080-M by START International is the Heavy-Duty variant with a programmable 5-length memory — up to five different cut lengths stored and recalled at the touch of a button. Tape widths 6–80 mm, cut lengths 40–9,999 mm, four operating modes. The most efficient solution for production lines with varying tape length requirements — engineered in the USA, proven worldwide.

Lined adhesive tapes without manual liner peeling. The TDA080-LR by START International combines Heavy-Duty tape dispensing with an integrated automatic liner remover — ideal for aluminium tapes and all lined adhesive tapes up to 51 mm wide. Cut lengths 40–9,999 mm, four operating modes, ±1 mm accuracy. No manual peeling — clean process, maximum throughput. Engineered in the USA, CE certified.

Two tapes. One cut. Maximum efficiency. The TDA080-LAM by START International laminates two tape rolls simultaneously, feeds the combined tape, and cuts it precisely to the programmed length — in a single automated step. Tape width 6–51 mm, cut lengths 40–9,999 mm, four operating modes. The industrial solution for motor manufacturing, coil winding, and combined tape applications worldwide. Engineered in the USA, CE certified.

Series production demands consistency — the ZCM1000 by START International delivers it. This electric tape dispenser combines photocell automation, digital length presetting, and a proven guillotine cut into one compact industrial tool for tape widths from 7 to 51 mm and cut lengths from 20 to 999 mm. The included 3-in-1 core holder enables tool-free roll changes in seconds. Engineered in Japan, trusted worldwide — for wire harnessing, PCB masking, assembly, and beyond.

High-volume production demands heavy-duty equipment. The TDA080 by START International is an electric industrial tape dispenser with all-metal construction, four operating modes, and a tape width range of 6 to 80 mm at cut lengths up to 9,999 mm. Feed speed 16.8 cm/s, digital length setting, integrated safety interlock. The proven heavy-duty platform for automotive, electronics, packaging, and aerospace — engineered in the USA, CE certified.

Adhesive tape tabs with a non-stick grip flap — fast, manual, no power required. The TAB100 by START International is a manual tab dispenser that produces tape pieces with an automatically folded, non-adhesive grip end via a single hand lever pull. Tape width 12–25 mm, adjustable cut length 50–210 mm, solid metal housing. The simplest solution for tabs in laboratory, quality control, and packaging applications.

TDW019 – Manual Tape Wrapper for Cables, Wire Harnesses, and Hoses up to 51 mm Bundle Diameter

In wire harness manufacturing, electronics assembly, and automotive production, cables, conduit bundles, and hoses must be wrapped reliably, cleanly, and consistently with adhesive tape every day. Uneven or loose tape wraps cause quality issues, assembly errors, and rework. The START International TDW019 is the dedicated tool for this task: a manual tape wrapper made from solid aluminium that simplifies and accelerates loading, wrapping, cutting, and bundling of cables and hoses up to 51 mm bundle diameter — no power supply, no maintenance, for any workstation.

Load, Wrap, Cut — One Motion

The TDW019 is designed for maximum operating speed. The tape is fed from the integrated reel holder; the operator wraps the adhesive tape around the cable or hose with a single rotation — the integrated cutter with safety blade guard cleanly cuts the tape. The result: uniform, professional tape wraps in seconds, even at high volume.

Solid Aluminium Construction — Durable and Maintenance-Free

The TDW019 is constructed entirely from solid aluminium — no plastic, no maintenance-intensive components. The device is engineered for continuous industrial use: it requires no regular maintenance and can be firmly mounted on the workbench using the pre-drilled mounting holes in the base — for stable, secure operation even at high wrapping speeds.

Universal — Any Tape Brand, Any Tape Type

The TDW019 is compatible with virtually all standard adhesive tape rolls in widths of 9 to 19 mm (0.375"–0.75"). Rolls up to 178 mm (7") outer diameter are accommodated. The included core holder fits 32 mm (1.25") cores; optional core holders for 38 mm (TDW019-04B) and 76 mm (TDW019-04C) are available separately.

Typical Application Areas

• Wire harness manufacturing in the automotive industry
• Cable assembly and bundling in electronics
• Hose and conduit wrapping in industrial manufacturing
• Connector and joint securing
• Textile and packaging applications requiring tape wrapping

What's in the Box

• TDW019 Manual Tape Wrapper
• QuickSTART instruction guide

Technical Specifications – TDW019

Optional core holders: TDW019-04B (38 mm / 1.5") and TDW019-04C (76 mm / 3") available separately. For automatic tape dispensing with defined lengths, see the ZCM1000 series.